1413 Titebond joiner's glue of the increased moisture resistance Ulimate III Wood Glue, 237 ml

1413 Titebond joiner's glue of the increased moisture resistance Ulimate III Wood Glue, 237 ml
Application:


Ideal for indoor and outdoor use.


It is allowed for the production of products in contact with food (Indirect contact with food is allowed;).


It is used for gluing hard and soft wood in carpentry (butt and surface joints such as spike / groove, tongue and groove, etc.), for the manufacture of exterior doors.


It is also used for applying laminate, postforming, laminated plastics, paper films, natural veneer on any wooden surfaces, MDF, fiberboard, chipboard, plywood by cold and hot method.


Not recommended for underwater connections.


Do not use for connections under significant static load.


Advantages:


TITEBOND III Ultimate Wood Glue is the first water-purifiable single-component wood glue with proven high moisture resistance.


The adhesive meets the ANSI / HPVA Type I standard for water resistance, in addition, it has a high bond strength, a longer open assembly time and a low application temperature.


The adhesive is non-toxic, solvent-free, and safer to use than conventional water-resistant wood adhesives.


It has a strong initial setting, grinds well without softening, and allows indirect contact with food (cutting boards).


The advantage of this glue is that it is ideal for indoor and outdoor work.


Description: Water
-resistant adhesive that is cleaned with water; Super-strong bonding; Strong initial setting;Longer open working time;Low application temperature;Does not affect the finish coating;Load group according to EN 204/205 1K/D4.Shelf life 24 months in the original packaging at 23 ° C
Instructions for use:
Application method: plastic bottle with a flat spout or application with a roller, brush.
The surfaces to be bonded must be clean and dry. The connections clearly match each other.Apply the adhesive to the surface in a solid layer and press firmly for at least 30 minutes (the longer the better).Do not put the connection point under load for 24 hours.Remove excess glue with a clean, damp cloth before drying.After use, close the lid.
Specifications:
Base: Improved PVA Emulsionaccount VOC: 5.6 g/lstate: Liquid density: 1.10 g / cm3 Color: Tanned leather White point temperature: 7 ° C Dry film: Light brown Dry residue: 48%Viscosity: 4200 MPa * NR: 2.5-3.5 White point (7 ° C) - the lowest recommended temperature of the adhesive, air and materials to be bonded, at which a high-quality connection is possible.Application temperature: above 8 ° C Working time: no more than 15 minutes (at 21 ° C and 50% humidity)Total assembly time: 20-25 minutes (at 21 ° C and 50% humidity)&Minimum consumption: approximately 162 g / m2applicable pressure: it is sufficient to combine the surfaces to be bonded together (7-10 kg / cm2 for soft wood, 9-13 kg/cm2 for medium wood, 13-18 kg / cm2 for hard wood).Strength of the adhesive joint according to ASTM D-905 (on solid maple): Температура                     Прочность, kg / cm2 & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; Destruction by solid wood, %Комнатная                               281               &nbsp                 & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp;& nbsp; & nbsp; & nbsp;   & nbsp; 56                                               & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp;;
Limitations: 
Titebond III Ultimate Wood Glue is not used in conditions of constant humidity or below water level.Not used for load-bearing products.Use when the temperature of the glue or parts is above 8 ° C.Do not freeze.Store at a temperature below 23 ° C. Storage at a higher temperature may cause the glue to thicken and reduce the shelf life.When thickening, shake the glue vigorously in the closed package until the product takes its original form.It is recommended to test the adhesive on samples of the materials to be bonded.
Precautions:
Use only in well-ventilated areas. May cause skin irritation. If you experience dizziness or other unpleasant effects, you should go out into the fresh air and consult your doctor. If the glue gets into your eyes, rinse them for 15 minutes with running water. If the glue gets on the skin, wipe it off and wash the skin with soapy water. Keep the glue out of the reach of children! Use only for its intended purpose.
It is delivered in plastic bottles with a convenient spout dispenser.
Valid until 10/2023