AMT Electronics PS-518V Fulcrum PS-518V Linear Power Supply

PS-518V Fulcrum PS-518V Linear Power Supply

Fulcrum PS-XXX is a series of linear (transformer) power supplies with several galvanically isolated outputs (up to eight in number).
The input voltage of the mains is selected by a switch: 115VAC/230VAC +/- 10%.
0.5A mains fuse for both voltage standards. There is a power switch.
To mount the device, the housing has three lobes with holes.
Each output is protected from short circuit and overcurrent.
Each output has a two-color LED indicating the output status.
The LED lights up green if the output is in operating mode.
If the output is in current protection mode, the LED lights red.
In the range of +/- 10% of the nominal selected mains voltage, all outputs can simultaneously be loaded with a rated current each.
The AMT Fulcrum PS-518V power supply has four isolated outputs with duplicated output connectors.

• Weight: 975g.
• Sizes:170 x 36 x 97mm.
• AC Power supply: 115V & 230V (+/- 10%)
• DC Output 1: DC 18V (500mA)
• DC Output 2 (switchable): DC 9/12V (250mA)
• DC Output 3 (switchable): DC 9/12V (100mA)
• DC Output 4 (switchable): DC 9/12V (100mA)
• Maximum total output current: 950mA

It is important to understand that:
OUT 1 + OUT 2 + OUT 3 + OUT 4 = 500mA + 250mA + 100mA + 100mA = 950mA = 0.95A At the same time, speaking of the total amperage (say, for a group of outputs 1 “OUT 1”), it is implied that:
OUT 1 = output A + output A’
For example:
OUT 1 (max 500 mA) = output A [guitar pedal consuming 350 mA] + output A’ [guitar pedal consuming 150 mA] = 350 mA + 150 mA = 500 mA - which falls under the current requirements for the output group OUT 1.

Included with this power supply are:

• 1 pc. mains power cable.