AMT Electronics PS4-100 SOW PS-4x100mA Power Supply Module

PS4-100 SOW PS-4x100mA Power Supply Module

AMT SOW PS-4X100 is a module galvanically connected to the primary power supply with four output voltages electrically connected via a negative wire. The value of each output voltage can be set to one of four values: 9VDC, 12VDC, 15VDC, 18VDC. The output current of each output is not more than 100mA.  The module is designed to power guitar pedals that consume no more than 100 mA, such as AMT Electronics: LA series preamps, FX guitar effects, DRIVE overload pedals.

The polarity of the power connector: minus inside, plus outside. This power supply is also suitable for pedals from other manufacturers that require one of the four suggested values for operation and consume a current of no more than 100 mA, and have the same connection polarity. The module is powered from the AMT SOW PS-1 primary power supply module or from an external adapter with an output voltage of 12-18VDC and a current not less than the pedals connected to it have in total.

The advantage of this power supply module is that when it is used in conjunction with other modular units, the need for different voltages and different current consumption is eliminated. The use of modules in this series is relevant for powering pedalboards.

Power supply modules are assembled into a single structure without additional connecting wires and mounting elements, using built-in connectors and mechanical locks. The output connectors of the supply voltages are located on opposite sides of the housing, two on each.

Dimensions of the housing:

• width – 36mm
• depth – 76mm
• height 33mm
• weight 170 g.