The benchmark among all professional 3-way monitors, providing highly accurate sound reproduction and true dynamic response over an extended frequency range.
The SC307 is a powerful monitor ideal for near and mid-field applications. And in surround sound systems, the SC307 also works well as a center channel.
The SC307 combines the power of three different amplifiers to deliver very efficient, dynamic and low-noise sound reproduction.
EVE Audio's three-way systems are designed for critical and detailed listening. While they will be able to provide plenty of power and loud bass, they also stand out from other systems if you are looking for a precise and highly detailed pair of speakers.
EVE Audio's three-way systems are designed around the concept of properly distributing frequencies between all the individual components and increasing the efficiency of the speaker system.
Each speaker in a three-way system is equipped with its own amplifier. One of the woofers reproduces sound only up to 300 Hz, acting as a kind of "bass driver". The other woofer gives you a fuller range up to a crossover frequency of 3000 Hz as a midrange driver. From that frequency it is replaced by an AMT tweeter. This minimizes mutual interference between the drivers, and allows the SC307 to deliver very efficient and dynamic sound reproduction.
This means that each woofer does less physical work, as the reproduced bandwidth is split between both woofers. This in turn results in less mechanical inertia and more efficient sound transmission.
Both woofers consist of a proprietary 6.5-inch SilverCone driver, the same one used in the SC207 two-way system, and feature a sophisticated low-distortion magnetic system. However, because both of these drivers are used at the same time, you get a greater frequency response, up to 40Hz.
The SC307 also utilizes the AMT RS2 tweeter, with a larger front panel and a larger internal magnet to drive the AMT tweeter with greater efficiency.
Three 100W PWM amplifiers won't leave you without ample power.
And don't worry about how to properly place the SC307 in your room or studio, the digital signal processor will help you select the system for left and right. That way, you'll always get the right symmetry between speakers instead of having to move them around.
Using the DIP switch on the rear panel, these settings can be temporarily locked to adapt to the room.
As with any EVE Audio loudspeaker, the SC305 is equipped with both an XLR balanced input and an unbalanced RCA input for added convenience.
All EVE Audio speakers are equipped with a digital signal processor. With a single touch, you have access to precise volume control and several different filter settings to help you tailor the system to your working style.
If you avoid digital processing, that's okay.
The processor's operation is supported by Burr-Brown's high-quality analog-to-digital converter (24-bit/192kHz), which sends the clean signal to the signal processing section. And because the PWM amplifiers are directly connected to the processor, no additional conversion is required.
The design of the phase inverter
It's all about geometry. One of the disadvantages of a phase-inverter port is low frequency distortion. As volume increases, efficiency decreases and distortion increases.
EVE Audio chose a large rectangular opening with smoothed edges on the back of the system. This is one of the reasons EVE speakers have high efficiency at low frequencies.
What's the result? High sound pressure with tight and sharp bass frequencies that are distortion free. Turn up the volume and the EVE produces rounded bass. And without the holes you see every time you glance at the speaker system.
Specifications:
Ищешь, где купить Studio monitor, active, EVE Audio SC307, 250W? Заказывай на Струнки.ру!
Для того, чтобы задать вопрос, необходимо авторизоваться